2ch Monacoinスレ Wiki

SGMinerはscrypt用にカスタマイズされたCGMinerだそうです。
R9シリーズ特有のバグも一部修正してあるらしいのですが、手元にR9が無いので確かめられません。

https://litecointalk.org/index.php?topic=13190.0
↑ページのsgminer-win64.zipからダウンロード。
バイナリはwindowsの64bit版のみです。
他OS向けはgithubにソースが有りますので自分でビルドしてください。


この採掘ソフトは完全にscrypt用なので.batに--scryptは必要ありません。

それと、--xintensity（-XでもOK）を使うことで、--intensity（-I）よりも細かく出力を調節できるようです。
値は0〜9999。


オプション

C:\sgminer>sgminer.exe --help
sgminer 4.0.0
Usage: sgminer.exe [-DdEgIXKklLpPQqUsTouwOchnV]
Options for both config file and command line:
--api-allow <arg>   Allow API access only to the given list of [G:]IP[/Prefix] a
ddresses[/subnets]
--api-description <arg> Description placed in the API status header, default: sg
miner version
--api-groups <arg>  API one letter groups G:cmd:cmd[,P:cmd:*...] defining the cm
ds a groups can use
--api-listen        Enable API, default: disabled
--api-mcast         Enable API Multicast listener, default: disabled
--api-mcast-addr <arg> API Multicast listen address
--api-mcast-code <arg> Code expected in the API Multicast message, don't use '-'

--api-mcast-des <arg> Description appended to the API Multicast reply, default:
''
--api-mcast-port <arg> API Multicast listen port (default: 4028)
--api-network       Allow API (if enabled) to listen on/for any address, default
: only 127.0.0.1
--api-port <arg>    Port number of miner API (default: 4028)
--auto-fan          Automatically adjust all GPU fan speeds to maintain a target
 temperature
--auto-gpu          Automatically adjust all GPU engine clock speeds to maintain
 a target temperature
--balance           Change multipool strategy from failover to even share balanc
e
--benchmark         Run sgminer in benchmark mode - produces no shares
--compact           Use compact display without per device statistics
--debug|-D          Enable debug output
--device|-d <arg>   Select device to use, one value, range and/or comma separate
d (e.g. 0-2,4) default: all
--disable-rejecting Automatically disable pools that continually reject shares
--expiry|-E <arg>   Upper bound on how many seconds after getting work we consid
er a share from it stale (default: 120)
--failover-only     Don't leak work to backup pools when primary pool is lagging

--failover-switch-delay <arg> Delay in seconds before switching back to a failed
 pool (default: 60)
--fix-protocol      Do not redirect to a different getwork protocol (eg. stratum
)
--gpu-dyninterval <arg> Set the refresh interval in ms for GPUs using dynamic in
tensity (default: 7)
--gpu-platform <arg> Select OpenCL platform ID to use for GPU mining (default: -
1)
--gpu-threads|-g <arg> Number of threads per GPU - one value or comma separated
list (e.g. 1,2,1)
--gpu-engine <arg>  GPU engine (over)clock range in Mhz - one value, range and/o
r comma separated list (e.g. 850-900,900,750-850)
--gpu-fan <arg>     GPU fan percentage range - one value, range and/or comma sep
arated list (e.g. 0-85,85,65)
--gpu-map <arg>     Map OpenCL to ADL device order manually, paired CSV (e.g. 1:
0,2:1 maps OpenCL 1 to ADL 0, 2 to 1)
--gpu-memclock <arg> Set the GPU memory (over)clock in Mhz - one value for all o
r separate by commas for per card
--gpu-memdiff <arg> Set a fixed difference in clock speed between the GPU and me
mory in auto-gpu mode
--gpu-powertune <arg> Set the GPU powertune percentage - one value for all or se
parate by commas for per card
--gpu-reorder       Attempt to reorder GPU devices according to PCI Bus ID
--gpu-vddc <arg>    Set the GPU voltage in Volts - one value for all or separate
 by commas for per card
--lookup-gap <arg>  Set GPU lookup gap for scrypt mining, comma separated
--intensity|-I <arg> Intensity of GPU scanning (d or 8 -> 31,default: d to maint
ain desktop interactivity)
--xintensity|-X <arg> Shader based intensity of GPU scanning (0 to 9999), overri
des --intensity|-I.
--kernel-path|-K <arg> Specify a path to where kernel files are (default: "/home
/kineta/cgminer-win64/bin")
--kernel|-k <arg>   Override kernel to use - one value or comma separated
--load-balance      Change multipool strategy from failover to quota based balan
ce
--log|-l <arg>      Interval in seconds between log output (default: 5)
--log-show-date|-L  Show date on every log line
--lowmem            Minimise caching of shares for low memory applications
--net-delay         Impose small delays in networking to not overload slow route
rs
--no-adl            Disable the ATI display library used for monitoring and sett
ing GPU parameters
--no-restart        Do not attempt to restart GPUs that hang
--no-submit-stale   Don't submit shares if they are detected as stale
--pass|-p <arg>     Password for bitcoin JSON-RPC server
--per-device-stats  Force verbose mode and output per-device statistics
--poolname <arg>    Name of pool.
--protocol-dump|-P  Verbose dump of protocol-level activities
--queue|-Q <arg>    Minimum number of work items to have queued (0+) (default: 1
)
--quiet|-q          Disable logging output, display status and errors
--quota|-U <arg>    quota;URL combination for server with load-balance strategy
quotas
--real-quiet        Disable all output
--remove-disabled   Remove disabled devices entirely, as if they didn't exist
--rotate <arg>      Change multipool strategy from failover to regularly rotate
at N minutes (default: 0)
--round-robin       Change multipool strategy from failover to round robin on fa
ilure
--scan-time|-s <arg> Upper bound on time spent scanning current work, in seconds
 (default: -1)
--sched-start <arg> Set a time of day in HH:MM to start mining (a once off witho
ut a stop time)
--sched-stop <arg>  Set a time of day in HH:MM to stop mining (will quit without
 a start time)
--shaders <arg>     GPU shaders per card for tuning scrypt, comma separated
--sharelog <arg>    Append share log to file
--shares <arg>      Quit after mining N shares (default: unlimited)
--socks-proxy <arg> Set socks4 proxy (host:port)
--tcp-keepalive <arg> TCP keepalive packet idle time (default: 30)
--temp-cutoff <arg> Temperature where a device will be automatically disabled, o
ne value or comma separated list (default: 95)
--temp-hysteresis <arg> Set how much the temperature can fluctuate outside limit
s when automanaging speeds (default: 3)
--temp-overheat <arg> Overheat temperature when automatically managing fan and G
PU speeds, one value or comma separated list (default: 85)
--temp-target <arg> Target temperature when automatically managing fan and GPU s
peeds, one value or comma separated list (default: 75)
--text-only|-T      Disable ncurses formatted screen output
--thread-concurrency <arg> Set GPU thread concurrency for scrypt mining, comma s
eparated
--url|-o <arg>      URL for bitcoin JSON-RPC server
--user|-u <arg>     Username for bitcoin JSON-RPC server
--verbose           Log verbose output to stderr as well as status output
--worksize|-w <arg> Override detected optimal worksize - one value or comma sepa
rated list
--userpass|-O <arg> Username:Password pair for bitcoin JSON-RPC server
--worktime          Display extra work time debug information
Options for command line only:
--config|-c <arg>   Load a JSON-format configuration file
See example.conf for an example configuration.
--default-config <arg> Specify the filename of the default config file
Loaded at start and used when saving without a name.
--help|-h           Print this message
--ndevs|-n          Display number of detected GPUs, OpenCL platform information
, and exit
--version|-V        Display version and exit