Prima Cannon 3500 Printer Software Mac Version 10.12.1




DOWNLOAD








































1 Updating Via the Internet Download the firmware to the multi-function device you are using via the Internet without using a PC (Windows/Mac), and then update the firmware.. Updating Via a PC (Windows/Mac) Download the firmware to a PC (Windows/Mac) from the Canon website, and then update the firmware.. After upgrading to 10 12 1 is not working anymore, and I get the Prima Canon 3500 Printer Software Mac Version 10.. MF SeriesiR1133iR1133AiR1133iFTo download, you need to enter the serial number of the multi-function device.. 1-2 Select [Update Firmware] press [OK] 1-3 Select [Via Internet] press [OK].. 2 Updating Via a PC (Windows/Mac)Download the firmware to a PC (Windows/Mac) from the Canon website, and then update the firmware.. 1-4 Update the firmware according to the instructions on the screen The firmware update is complete.. There are two methods for updating the firmware Check the following table and use the method that corresponds to the device model you are using.. 12 1 DownloadYou may need to update the firmware of the multi-function device in order to use Canon Mobile Scanning for Business.. Hi, my printer was working fine, I installed the latest UFR II drivers (9/20/16).. - The multi-function device and PC need to be connected by LAN or USB 2-1 Download the FirmwareDownload the firmware for the multi-function device you are using from the page for downloading additional software.. The multi-function device and PC need to be connected by LAN or USB Download the Firmware Download the firmware for the multi-function device you are using from the page for downloading additional software.. If you are using the device model that is required to be updated, a message prompting you to update is displayed when using Canon Mobile Scanning for Business.. 12 1 Windows 7Printer Software DownloadPrinter Software EpsonPrima Canon 3500 Printer Software Mac Version 10.. Start Canon Mobile Scanning for Business and use the multi-function device whose firmware has been updated.. Device NameUpdate FirmwareVia InternetVia PCMF4800 Series-AvailableMF4700 Series-AvailableMF5900 Series-AvailableiR1133 Series-AvailableMF6100 SeriesAvailableAvailableMF8200C SeriesAvailableAvailableMF8500C SeriesAvailableAvailableNOTEFor imageRUNNER ADVANCE series, you do not need to update the firmware.. - The multi-function device needs to be connected to the Internet 1-1 From the menu on the operation panel, select [System Management Settings] press [OK]. 34bbb28f04 潟ゃ≪潟ゃ鴻祉ャ2018ゃ祉潟鴻,若若1080p祉潟若

コメントをかく


「http://」を含む投稿は禁止されています。

利用規約をご確認のうえご記入下さい

Menu

メニューサンプル1

メニューサンプル2

開くメニュー

閉じるメニュー

  • アイテム
  • アイテム
  • アイテム
【メニュー編集】

メンバーのみ編集できます