Sistemas DDM

Xtracks 3 20 Msts Routes




Xtracks 3 20 Msts Routes





































Short 5d switches(by Steven Masters)3-Way switchesSwitch (by Steven Masters): Ladder (by Steven Masters):10d modular switchesSwitch (by Steven Masters): Ladder (by Steven Masters):Tight curved switches(by Steven Masters)40/75 degree Xovers(by Steven Masters)Modular 3 & 6 degree switchesPlease note that the one-piece modular switches (a1tPnt3dB* & a1tPnt6dB*) can be used in most cases in the following examples to reduce object count.. Inserting a Track Node(by Steven Masters) This trick is used to insert a track node in long stretches of single line track.. Thanks to the wider radius the switches can be fitted in a 10d arch instead of the smaller radius switches which use a 20d arch.. Curved 1500r & 2000r switches(by Steven Masters) Steven used my calculations to produce 1500r and 2000r curved switches along the same designs I used for 500r and 1000r.. Note that the route is not kept up to date with the latest version of XTracks and thus does not make use of all the latest additions.. train-sim com The file name for this route is 'dtref10 zip' The readme says I should be good to go but the route doesn't show up in the menu.. But, I'm a bit of a noob to installing things to MSTS Version 3 20, November 2007.. This can be a real problem on routes with long stretches of single line tracks, especially if it contains many curves.. It can be found at www train-sim com in the file library with the name 'xroute zip'.. There is also a reference route for DualTracks made by William Adams which you can find at www.. Only in the slips is the older design necessary These are designed to allow a large number of different layouts.. To minimize the problem this very short siding track can be inserted to divide the long stretch of track into shorter stretches.. Due to rounding when calculating the trains position there is an error when reaching the next track node which can cause the train to jump.. Below you can find a number of examples for how to use the XTracks sections Even more examples you can find if you download my reference route.. The train position is calculated from the last track node passed A track node is a switch or crossing and shows like black dots in the Activity Editor.. Thanks to using two switches there is no risk of derailing as both paths converge again after two meters even if you happen to use the 'G'-key.. These pieces are also available in narrow gauge versions (3 degree only) The concept of both 3 & 6 degrees are the same thus I only show how to lay the 3 degree switches.. Tracks included with XTracks and from the original MSTS XTracks 3 0 should work happily along routes built with other add-on track.. I have not downloaded Xtracks because I'm having issues with that file as well (if it's the correct one) but I would assume the route would still install without them and I would worry about the Xtracks later.. To understand the basic geometry I will walk you through some basic combinations starting with a simple crossover. 773a7aa168 Darksiders Wrath Of WarPc蕭���х軒��ユ�������������潟����若��,Happy Room 2018PC��������≧�������若�吾�с�潟����������潟����若��