詳解ファイルシステム

2.6.18-rc1

Rohit Seth:

x86_64: Change assembly to use regular cpuid_count macro
x86_64: moving phys_proc_id and cpu_core_id to cpuinfo_x86
x86_64: x86_64 setup.c - printing cmp related boottime information
i386: move phys_proc_id and cpu_core_id to cpuinfo_x86

Roland Dreier:

IB/srp: Use FMRs to map gather/scatter lists
IB/mthca: Convert FW commands to use wait_for_completion_timeout()
IB: Make needlessly global ib_mad_cache static
IPoIB: Mention RFC numbers in documentation
IB/srp: Get rid of "Target has req_lim 0" messages
IPoIB: Avoid using stale last_send counter when reaping AHs
IB/ipath: Add client reregister event generation
IB/uverbs: Don't decrement usecnt on error paths
IB/uverbs: Factor out common idr code
IB/mthca: Fix memory leak on modify_qp error paths
IB/mthca: Make all device methods truly reentrant
IB/uverbs: Don't serialize with ib_uverbs_idr_mutex
IB/uverbs: Remove unnecessary list_del()s
IB/uverbs: Set correct user handle for user SRQs

Roman Kagan:

[ATM]: basic sysfs support for ATM devices

Roman Zippel:

kconfig: improve config load/save output
kconfig: fix .config dependencies
kconfig: remove SYMBOL_{YES,MOD,NO}
kconfig: allow multiple default values per symbol
kconfig: allow loading multiple configurations
kconfig: integrate split config into silentoldconfig
kconfig: move .kernelrelease
kconfig: add symbol option config syntax
kconfig: add defconfig_list/module option
kconfig: Add search option for xconfig
kconfig: finer customization via popup menus
kconfig: create links in info window
kconfig: jump to linked menu prompt
kconfig: warn about leading whitespace for menu prompts
kconfig: remove leading whitespace in menu prompts
kconfig: KCONFIG_OVERWRITECONFIG
kbuild: `make kernelrelease' speedup
x86_64: use select for GART_IOMMU to enable AGP
x86: fix __range_ok constraint
m68k: completely initialize hw_regs_t in ide_setup_ports
m68k: atyfb_base compile fix for CONFIG_PCI=n
m68k: cleanup unistd.h
m68k: Remove some unused definitions in zorro.h
m68k: use c99 initializer
m68k: print correct stack trace
m68k: restore amikbd compatibility with 2.4
m68k: wd33c93: extra delay
m68k: use proper defines for zone initialization
m68k: adjust to changed HARDIRQ_MASK
m68k: clean up uaccess.h
kbuild: fix silentoldconfig recursion
m68k: fix uaccess.h for gcc-3.x
m68k: fix constraints of the signal functions and some cleanup
m68k: fix __iounmap for 030
m68k: small flush_icache() cleanup
m68k: Add the generic dma API functions
m68k: dma API addition
m68k: fix show_registers()
m68k: separate handler for auto and user vector interrupt
m68k: cleanup generic irq names
m68k: cleanup amiga irq numbering
m68k: introduce irq controller
m68k: convert generic irq code to irq controller
m68k: convert amiga irq code
m68k: convert apollo irq code
m68k: convert atari irq code
m68k: convert hp300 irq code
m68k: convert mac irq code
m68k: convert q40 irq code
m68k: convert sun3 irq code
m68k: convert VME irq code
fix and optimize clock source update
fix rt-mutex defaults and dependencies

root:

ahci: Ensure that we don't grab both functions

Rudolf Marek:

w83627ehf: Add voltage inputs support
i2c-piix4: Add ATI IXP200/300/400 support
I2C: i2c-piix4: Remove the fix_hstcfg parameter
HWMON: Trim VID values to correct number of bits
hwmon: Sysfs interface documentation update, 1 of 2
hwmon-vid: Add support for Intel Core and Conroe

Russ Anderson:

[IA64-SGI] Remove SN SAL error handling feature bit that is no longer needed

Russell King:

[MMC] Add (MMC) to entry in MAINTAINERS file
[SERIAL] PARPORT_SERIAL should depend on SERIAL_8250_PCI
[ARM] Remove rt_sigframe puc and pinfo pointers
[ARM] Replace extramask with a full copy of the sigmask
[ARM] Merge sigcontext and sigmask members of sigframe
[ARM] Re-use sigframe within rt_sigframe
[ARM] Gather common sigframe restoration code into restore_sigframe()
[ARM] Gather common sigframe saving code into setup_sigframe()
[MMC] Convert all hosts except mmci to use data->blksz
[ARM] Fix badge4 build error
Merge AT91 branch
Merge Zaurus branch
[ARM] Include asm/hardware.h not asm/arch/hardware.h
Merge S3Cxxxx branch
[ARM] Fix tosa build error
Driver Core: Fix platform_device_add to use device_add
[ARM] Add thread_notify infrastructure
[ARM] Enable VFP to be built when non-VFP capable CPUs are selected
Merge ep93xx branch
Merge S3C24xx branch
[ARM] Add identifying number for non-rt sigframe
Merge signal handler branch
[ARM] Remove RETINSTR macro
[ARM] Remove LOADREGS macro
[ARM] Remove partial non-v6 binutils compatibility
[ARM] Remove save_lr/restore_pc macros
[ARM] Remove MODE_(SVC|IRQ|FIQ|USR) and DEFAULT_FIQ
[ARM] Update mach-types
[ARM] Remove the __arch_* layer from uaccess.h
[ARM] nommu: we need the TLS register emulation for nommu mode
[ARM] nommu: adjust headers for !MMU ARM systems
[ARM] nommu: uaccess tweaks
[ARM] nommu: add stubs for ioremap and friends
[ARM] nommu: Provide a simple flush_dcache_page implementation
[ARM] Remove TABLE_SIZE, and several unused function prototypes
[ARM] nommu: remove fault-armv, mmap and mm-armv files from nommu build
[ARM] nommu: prevent Xscale-based machines being selected
[ARM] nommu: backtrace code must not reference a discarded section
[ARM] Remove yucky ifdefs to print "id(wb)BRR" suffix on CPU name
[ARM] nommu: provide a way for correct control register value selection
Merge omap tree
[ARM] Set bit 4 on section mappings correctly depending on CPU
[ARM] Fix sa11x0 SDRAM selection
[ARM] Add section support to ioremap
Merge nommu branch
[SERIAL] Convert fifosize to an unsigned int
[ARM] More missing proc-macros.S includes
[ARM] Fix bad asm instruction in proc-arm925.S
[ARM] Fix ISA IRQ resources
[ARM] Fix ecard.c resource warnings.
[ARM] Fix warnings in arch/arm/kernel/setup.c
[ARM] Fix warning in consistent.c
[SERIAL] Ensure 8250_pci quirks are not marked __devinit
[ARM] Fix lh7a40x_udc.c

Rusty Russell:

x86: increase interrupt vector range

Rusty Scott:

V4L/DVB (3735): Add support for pcHDTV HD5500 ATSC/QAM

Salyzyn, Mark:

[SCSI] aacraid: remove x86_64 IOMMU dependent code

Sam Ravnborg:

kbuild: fix false section mismatch with ARCH=um build
kbuild: check license compatibility when building modules
kbuild: ignore make's built-in rules & variables
kbuild: fix make -rR breakage
kbuild: replace abort() with exit(1)
kbuild: trivial fixes in Makefile
kbuild: fix ia64 breakage after introducing make -rR
kbuild: fix segv in modpost
kbuild: warn when a moduled uses a symbol marked UNUSED
kbuild: explicit turn off gcc stack-protector
Merge branch 'master' of /home/sam/kernel/linux-2.6/
kbuild: introduce utsrelease.h

Sam Revitch:

[ALSA] hda-codec - Add support for Apple Mac Mini (early 2006)
[ALSA] usb-audio support for Turtle Beach Roadie

Samuel Ortiz:

[IRDA]: Initial support for MCS7780 based dongles
[IRDA]: ali-ircc: using device model power management
ARM: OMAP: Add OMAP_TAG_CAMERA_SENSOR

Samuel Thibault:

kconfig: enhancing accessibility of lxdialog

Santiago Leon:

ibmveth change buffer pools dynamically

Saqeb Akhter:

V4L/DVB (4284): Cx24123: fix set_voltage function according to the specs
V4L/DVB (4285): Cx88: add support for Geniatech Digistar / Digiwave 103g

Sascha Hauer:

[ARM] 3566/1: netX: register definitions
[ARM] 3571/1: netX: serial driver for Hilscher netX
[ARM] 3572/1: netX: framebuffer driver for Hilscher netX
[ARM] 3567/2: arm: base support for Hilscher netX
[ARM] 3568/2: netX: pointer fifo driver
[ARM] 3569/2: netX: driver for XMAC/XPEC engines
[ARM] 3574/1: netX: board support for NXDKN development board
[ARM] 3575/1: netX: board support for NXDB500 development board
[ARM] 3576/1: netX: board support for NXEB500HMI development board
[ARM] 3577/1: netX: Default config for netx based boards
network driver for Hilscher netx
[MTD] Fix off-by-one error in physmap.c

Savin Zlobec:

[MTD] NAND: Missing fixups

Scott Alfter:

V4L/DVB (4048): Add support for the Texas Instruments TLV320AIC23B audio codec

Sean Hefty:

IB: common handling for marshalling parameters to/from userspace
IB/cm: Match connection requests based on private data
[NET]: Export ip_dev_find()
IB: address translation to map IP toIB addresses (GIDs)
IB: IP address based RDMA connection manager
IB/ucm: convert semaphore to mutex
IB/ucm: Get rid of duplicate P_Key parameter
IB: Add ib_init_ah_from_wc()
IB/sa: Add ib_init_ah_from_path()
IB/cm: Use address handle helpers
IB/core: Set alternate port number when initializing QP attributes

Sean Young:

[PCMCIA MTD] Fix leak and crash on reboot
[MTD] RFD FTL: Be noisier, and don't assume block without RFD magic are erased
USB Phidget InterfaceKit: make inputs pollable and new device support

Sebastien Dugue:

futex_requeue() optimization

Serge E. Hallyn:

minor audit updates
kthread: update loop.c to use kthread
kthread: convert smbiod
kthread: convert stop_machine into a kthread
Convert s390_collect_crw_info() in s390mach.c from being started
[S390] fix duplicate export of overflow{ug}id
pcmcia: convert pcmcia_cs to kthread

Sergei Shtylyov:

au1000_eth.c probe code straightened up
NAND: AMD Au1550 driver reads write-only register
NAND: Fix NAND ECC errors on AMD Au1550
[MIPS] arch/mips/au1000/time.c cleanup
Au1550/1200: add missing PSC #define's, make OSS driver use the proper ones
ide: actually honor drive's minimum PIO/DMA cycle times
ide: pdc202xx_old: remove the obsolete busproc

Sergey Vlasov:

x86_64: Do not use -ffunction-sections for modules

Shaohua Li:

PCI: disable msi mode in pci_disable_device
Driver Core: Allow sysdev_class have attributes
swsusp: add architecture special saveable pages support
swsusp: i386 mark special saveable/unsaveable pages
swsusp: x86_64 mark special saveable/unsaveable pages
don't use flush_tlb_all in suspend time
move do_suspend_lowlevel to correct segment
x86: cpu_init(): avoid GFP_KERNEL allocation while atomic

Shuya MAEDA:

[PKT_SCHED]: PSCHED_TADD() and PSCHED_TADD2() can result,tv_usec >= 1000000

Siddha, Suresh B:

x86_64: fix apic error on bootup
sched: mc/smt power savings sched policy

Sigmund Augdal Helberg:

V4L/DVB (4172): Remove spurious newlines in dprintk's. Add dst(card-num) as prefix in dprintk
V4L/DVB (4176): Bug-fix: Fix memory overflow

Sonny Rao:

fix race in idr code
rtc: fix idr locking
[POWERPC] Fix idr locking in init_new_context

Sridhar Samudrala:

[SCTP]: Don't do CRC32C checksum over loopback.
[TCP]: Export accept queue len of a TCP listening socket via rx_queue

Srivatsa Vaddagiri:

sched_domain: handle kmalloc failure
sched_domai: Don't use GFP_ATOMIC
sched_domai: Use kmalloc_node
sched_domai: Allocate sched_group structures dynamically

Stefan Richter:

ieee1394: nodemgr: do not peek into struct semaphore

Stefan Weinhuber:

[S390] missing check in dasd_eer_open.
[S390] dasd eer data format.

Stefano Brivio:

bcm43xx: fix whitespace
bcm43xx: add PCI ID for bcm4319