¾Ü²ò¥Õ¥¡¥¤¥ë¥·¥¹¥Æ¥à

2.6.18-rc1

Stephen Hemminger:

skge: use workq for PHY handling
skge: TX low water mark definition
skge: transmit complete via IRQ not NAPI
skge: dont allow bad hardware address from ROM
skge: version 1.6
[LLC]: use more efficient ether address routines
[LLC]: allow datagram recvmsg
[LLC]: use rcu_dereference on receive handler
[LLC]: allow applications to get copy of kernel datagrams
[LLC]: add multicast support for datagrams
[BRIDGE]: optimize conditional in forward path
[BRIDGE]: fix module startup error handling
[BRIDGE]: netlink interface for link management
[TCP]: TCP Compound quad root function
[TCP]: Minimum congestion window consolidation.
[TCP]: TCP Probe congestion window tracing
[TCP]: Limited slow start for Highspeed TCP
[NET]: net.ipv4.ip_autoconfig sysctl removal
[TCP] Westwood: fix first sample
Driver core: class_device_add needs error checks
Get rid of /proc/sys/proc

Stephen Rothwell:

powerpc: add all the iSeries virtual devices to the device tree
powerpc: use the device tree for the iSeries vio bus probe
powerpc: use a common vio_match_device routine
powerpc: merge the rest of the vio code
powerpc: update iseries_veth device-tree information
powerpc: update iSeries viodasd device-tree entries
powerpc: update iSeries vdevice
powerpc: update iSeries viocd and viotape device-tree
powerpc: the iSeries vio lan driver changed device type
powerpc: tidy up iseries/pci.c
powerpc: reintroduce HvCallPci_configLoad32
powerpc: move iSeries PCI devices to the device tree
powerpc: remove iSeries_Global_Device_List
powerpc: remove Irq from pci_dn
powerpc: remove LogicalSlot from pci_dn
powerpc: iSeries PCI devices can now have a devpsec attribute
powerpc: clean up iSeries PCI probe
powerpc: make iSeries flat device tree stuff static
powerpc: give iSeries device tree nodes better names
powerpc: split device tree stuff out of iseries/setup.c
powerpc: make iSeries flattened device tree dynamic
powerpc: make iSeries flattened device tree dynamic - part 2
powerpc: cleanup of iSeries flat device tree
[POWERPC] Clean up it_lp_queue.h
[POWERPC] update asm-powerpc/time.h
[POWERPC] Remove unused function call_with_mmu_off
[POWERPC] Consolidate some of kernel/misc*.S
[POWERPC] Make lparcfg.c work when both iseries and pseries are selected

Steve French:

[CIFS] Cleanup extra whitespace in dmesg logging. Update cifs change log
[CIFS] Support for setting up SMB sessions to legacy lanman servers
[CIFS] Missing include shows up on some architectures
[CIFS] Support for setting up SMB sessions to legacy lanman servers part 2
[CIFS] Fix minor build breaks due to cifs kconfig issues
[CIFS] Missing brace
[CIFS] Fix mapping of old SMB return code Invalid Net Name so it is
[CIFS] Support for older servers which require plaintext passwords
CIFS] Support for older servers which require plaintext passwords - part 2
[CIFS] Fix mask so can set new cifs security flags properly
[CIFS] NTLMv2 support part 2
[CIFS] NTLMv2 support part 3
[CIFS] NTLMv2 support part 4
[CIFS] Add support for readdir to legacy servers
Merge with /.../torvalds/linux-2.6.git
[CIFS] NTLMv2 support part 5
[CIFS] fix minor compile warning when config_cifs_weak_security is off
Merge with /.../torvalds/linux-2.6.git
[CIFS] Enable sec flags on mount for cifs (part one)
Merge with /.../torvalds/linux-2.6.git
[CIFS] Fix compile warning when CONFIG_CIFS_EXPERIMENTAL is off
[CIFS] remove some redundant null pointer checks
[CIFS] Fix allocation of buffers for new session setup routine to allow
[CIFS] Fix alignment of unicode strings in previous patch
[CIFS] Fix authentication choice so we do not force NTLMv2 unless the

Steve Grubb:

make set_loginuid obey audit_enabled

Steven Rostedt:

sched: simplify bitmap definition
unnecessary long index i in sched
BUG() if setscheduler is called from interrupt context
pi-futex: rt mutex docs

Stuart MacDonald:

USB: Whiteheat: fix firmware spurious errors

Sumant Patro:

[SCSI] megaraid_sas: switch fw_outstanding to an atomic_t
[SCSI] megaraid_sas: zcr with fix

Sunil Mushran:

ocfs2: Cleanup message prints
ocfs2: silence ENOENT during lookup of broken links

Sylvain Pasche:

V4L/DVB (4023): Subject: Pinnacle PCTV grey remote control support

Takashi Iwai:

[ALSA] vxpocket - Fix a typo
[ALSA] hda-codec - Add Thinkpad X60/T60/Z60 support
[ALSA] hda-codec - Fix a typo
[ALSA] Clean up ugly hacks in pcm_params.h
[ALSA] Clean up EXPORT_SYMBOL()s in snd module
[ALSA] Clean up EXPORT_SYMBOL()s in snd-seq module
[ALSA] ac97 - Move EXPORT_SYMBOL() to adjacent to each function
[ALSA] opl3 - Move EXPORT_SYMBOL() to adjacent to each function
[ALSA] opl4 - Move EXPORT_SYMBOL() to adjacent to each function
[ALSA] emu10k1 - Move EXPORT_SYMBOL() to adjacent to each function
[ALSA] trident - Move EXPORT_SYMBOL() to adjacent to each function
[ALSA] emux - Move EXPORT_SYMBOL() to adjacent to each function
[ALSA] vx - Move EXPORT_SYMBOL() to adjacent to each function
[ALSA] i2c - Move EXPORT_SYMBOL() to adjacent to each function
[ALSA] hda-codec - Move EXPORT_SYMBOL() to adjacent to each function
[ALSA] Move OSS-specific hw_params helper to snd-pcm-oss module
[ALSA] Clean up ugly hacks in pcm_lib.c
[ALSA] Make buffer size of proc text interface variable
[ALSA] Remove unneeded read/write_size fields in proc text ops
[ALSA] Remove spinlocks around proc prints
[ALSA] Insert might_sleep() in snd_iprintf()
[ALSA] Add O_APPEND flag support to PCM
[ALSA] Fix mmap_count with O_APPEND opened streams
[ALSA] Fix compile warning in timer.c
[ALSA] hda-codec - Add support for LG S1 laptop
[ALSA] Add a workaround for ASUS A6KM
[ALSA] cs5535audio - Add missing module_param*() and MODULE_PARM_DESC()
[ALSA] hda-codec - Fix mute switch on VAIO laptops with STAC7661
[ALSA] Fix a typo in writing-an-alsa-driver document
[ALSA] cmipci - Disable integrated mpu401 as default
[ALSA] rme96 - Fix OSS full-duplex
[ALSA] hda-codec - Add support for Sony Vaio VGN-S3HP
[ALSA] Remove obsolete description from ALSA-Configuration.txt
[ALSA] hda-codec - Fix handling of capture controls on ALC882 3/6-stack models
[ALSA] Fix rwlock around snd_iprintf() in sound core
[ALSA] Fix description of snd-hda-intel driver in document
[ALSA] Fix pcm-draining of capture stream in PCM middle layer
[ALSA] Remove zero-initialization of static variables
[ALSA] hda-codec - Fix init verbs for ALC260 hp model
[ALSA] usbaudio - Fix a typo
[ALSA] mpu401_uart - Fix coding style and code clean up
[ALSA] Fix description of cs5535audio driver in ALSA-Configuration.txt
[ALSA] hdsp - Fix compilation with hdsp driver built in kernel
[ALSA] Change an arugment of snd_mpu401_uart_new() to bit flags
[ALSA] au88x0 - Fix 64bit address of MPU401 MMIO port
[ALSA] ice1724 - Add functionality for Audiotrak Prodigy 7.1 LT
[ALSA] hda-codec - Fix model for HP dc7600
[ALSA] cmipci - Fix a typo in 'PC Speaker Playback Switch' control
[ALSA] hda-intel - Fix race in remove
[ALSA] Fix possible races in PCI driver removal
[ALSA] ac97 - Add Thinkpad T41p to AD1981 jack-sense blacklist
[ALSA] hda-codec - Add model entry for HP nx6320
[ALSA] Fix races in irq handler and ioremap
[ALSA] Remove bogus check of mmap_count in snd_pcm_release()
[ALSA] Fix invalid __init in ALSA ISA drivers
[ALSA] hda-codec - Add SPDIF support to Thinkpad T/X/Z60
[ALSA] hda-codec - Use 3stack model for ASUS P5RD2-VM / P5GPL-X SE
[ALSA] Remove ppc/toonie.c
[ALSA] Remove nested mutexes in seq_ports.c
[ALSA] hda-codec - Show EAPD and pin-detection capabilities in proc
[ALSA] Suppress irq handler mismatch messages in ALSA ISA drivers
[ALSA] fix build failure due to snd-aoa
[ALSA] Fix wrong dependencies of snd-aoa driver
[ALSA] hda-codec - Add model entry for Samsung X60 Chane
[ALSA] Fix misuse of __list_add() in seq_ports.c
[ALSA] Remove CONFIG_EXPERIMENTAL from intel8x0m driver
[ALSA] ak4xxx-adda - Code clean-up
[ALSA] Fix a typo in echoaudio/midi.c
[ALSA] Fix/add support of Realtek ALC883 / ALC888 and ALC861 codecs
[ALSA] Add Intel D965 board support
[ALSA] echoaudio - Fix Makefile
[ALSA] echoaudio - Remove kfree_nocheck()

Tejun Heo:

libata: increase LBA48 max sectors to 65535
libata: fix ata_set_mode() return value
libata: make ata_bus_probe() return negative errno on failure
libata: separate out ata_spd_string()
libata: convert do_probe_reset() to ata_do_reset()
libata: implement ata_dev_enabled and disabled()
libata: make ata_set_mode() handle no-device case properly
libata: reorganize ata_set_mode()
libata: don't disable devices from ata_set_mode()
libata: preserve SATA SPD setting over hard resets
libata: implement ata_dev_absent()
libata: implement ap->sata_spd_limit and helpers
libata: use SATA speed down in ata_drive_probe_reset()
libata: add 5s sleep between resets
libata: implement ata_down_xfermask_limit()
libata: improve ata_bus_probe()
libata: consider disabled devices in ata_dev_xfermask()
libata: report device number when PIO fails
libata: ata_dev_revalidate() printk update
libata: ATA_FLAG_IN_EH is not used, kill it
libata: clean up constants
libata: rename ATA_FLAG_PORT_DISABLED to ATA_FLAG_DISABLED
libata: clear only affected flags during ata_dev_configure()
libata: clear ATA_DFLAG_PIO before setting it
libata: add ATA_QCFLAG_IO
libata: pass qc around intead of ap during PIO
libata: always generate sense if qc->err_mask is non-zero
libata: don't read TF directly from sense generation functions
libata: add @cdb to ata_exec_internal()
libata: dec scmd->retries for qcs with zero err_mask
libata: separate out libata-eh.c
libata: make some libata-core routines extern
libata: print SControl in SATA link status info message
ahci: do not fail softreset if PHY reports no device
libata: set default cbl in probeinit
libata: kill @verbose from ata_reset_fn_t
libata: make reset methods complain when they fail
sata_sil24: fix timeout calculation in sil24_softreset
sata_sil24: better error message from softreset
libata: implement ata_wait_register()
ahci: use ata_wait_register()
sata_sil24: use ata_wait_register()
libata: disable failed devices only once in ata_bus_probe()
libata: cosmetic update to ata_bus_probe()
libata: export ata_set_sata_spd()
sata_sil24: typo fix
sata_sil24: rename PORT_IRQ_SDB_FIS to PORT_IRQ_SDB_NOTIFY
sata_sil24: add more constants
sata_sil24: consolidate host flags into SIL24_COMMON_FLAGS
sata_sil24: implement loss of completion interrupt on PCI-X errta fix
sata_sil24: implement sil24_init_port()
sata_sil24: put port into known state before softresetting
sata_sil24: kill 10ms sleep in softreset
sata_sil24: reimplement hardreset
sata_sil24: don't do hardreset during driver initialization
sata_sil24: fix on-memory structure byteorder
sata_sil24: enable 64bit
SCSI: implement shost->host_eh_scheduled
libata: silly fix in ata_scsi_start_stop_xlat()
libata: rename ata_down_sata_spd_limit() and friends
ahci: hardreset classification fix
libata: unexport ata_scsi_error()
libata: kill duplicate prototypes
libata: fix ->phy_reset class code handling in ata_bus_probe()
libata: clear ap->active_tag atomically w.r.t. command completion
libata: hold host_set lock while finishing internal qc
libata: use preallocated buffers
libata: move ->set_mode() handling into ata_set_mode()
libata: remove postreset handling from ata_do_reset()
libata: implement qc->result_tf
sata_sil24: update TF image only when necessary
libata: init ap->cbl to ATA_CBL_SATA early
libata: implement new SCR handling and port on/offline functions
libata: use new SCR and on/offline functions
libata: kill old SCR functions and sata_dev_present()
libata: add dev->ap
libata: use dev->ap
libata: implement ATA printk helpers
libata: use ATA printk helpers
libata-eh-fw: add flags and operations for new EH
libata-eh-fw: clear SError in ata_std_postreset()
libata-eh-fw: use special reserved tag and qc for internal commands
libata-eh-fw: update ata_qc_from_tag() to enforce normal/EH qc ownership
libata-eh-fw: implement new EH scheduling via error completion
libata-eh-fw: implement ata_port_schedule_eh() and ata_port_abort()
libata-eh-fw: implement freeze/thaw
libata-eh-fw: implement new EH scheduling from PIO
libata-eh-fw: update ata_scsi_error() for new EH
libata-eh-fw: update ata_exec_internal() for new EH
libata-eh-fw: update SCSI command completion path for new EH
libata-eh: add ATA and libata flags for new EH
libata-eh: implement dev->ering
libata-eh: implement ata_eh_info and ata_eh_context
libata-eh: implement new EH
libata-eh: implement BMDMA EH
ata_piix: convert to new EH
sata_sil: convert to new EH
ahci: convert to new EH
ahci: add PIOS interim interrupt handling
sata_sil24: convert to new EH
Merge branch 'irq-pio'
libata: fix irq-pio merge
libata-ncq: add NCQ related ATA/libata constants and macros
libata-ncq: pass ata_scsi_translate() return value to SCSI midlayer
libata-ncq: rename ap->qactive to ap->qc_allocated
libata-ncq: implement ap->qc_active, ap->sactive and complete helper
libata-ncq: implement NCQ command translation and exclusion
libata-ncq: update EH to handle NCQ
libata-ncq: implement NCQ device configuration
ahci: clean up AHCI constants in preparation for NCQ
ahci: add HOST_CAP_NCQ constant
ahci: kill pp->cmd_tbl_sg
ahci: implement NCQ suppport
sata_sil24: implement NCQ support
libata: enforce default EH actions
SCSI: make scsi_implement_eh() generic API for SCSI transports
libata: set PIO-0 after successful EH reset
libata: shift host flag constants
libata: implement ata_eh_wait()
libata-hp-prep: add flags and eh_info/context fields for hotplug
libata-hp-prep: implement ata_dev_init()
libata-hp-prep: make some ata_device fields persistent
libata-hp-prep: update ata_scsi_find_dev() and friends
libata-hp-prep: use __ata_scsi_find_dev()
libata-hp-prep: implement ap->hw_sata_spd_limit
libata-hp-prep: store attached SCSI device
libata-hp-prep: add ata_aux_wq
libata-hp-prep: make probing related functions global
libata-hp-prep: implement sata_phy_debounce()
libata-hp-prep: add prereset() method and implement ata_std_prereset()
libata-hp-prep: implement followup softreset handling
libata: export ata_hsm_move()
sata_sil: add new constants in preparation for new interrupt handler
sata_sil: new interrupt handler
sata_sil24: rename PORT_PRB to PORT_LRAM and add PORT_LRAM_SLOT_SZ
sata_sil24: update sil24_hardreset()
libata-hp: implement ata_eh_detach_dev()
libata-hp: implement hotplug
libata-hp: implement SCSI part of hotplug
libata-hp: implement warmplug
libata-hp: hook warmplug
libata-hp: implement bootplug
libata-hp: update unload-unplug
ata_piix: convert ata_piix to new probing mechanism
sata_sil: convert to new probing mechanism and add hotplug support
ahci: convert to new probing mechanism and add hotplug support
sata_sil24: convert to new probing mechanism and add hotplug support
libata-hp: killl ops->probe_reset
libata-hp: move ata_do_reset() to libata-eh.c
libata: add missing finish_wait() call in ata_port_wait_eh()
libata: cosmetic change in struct ata_port
libata: add missing ->data_xfer for pdc_adma
sata_sil: add controller unplug detection in sil_interrupt()
libata: fix comment above ata_exec_internal()
libata: fix ATA_EH_REVALIDATE clearing
libata: fast exit from EH while unloading
sata_sil: update device hotplug handling, take #2
libata: fix oops caused rescanning NULL sdev
libata: add host_set->next for legacy two host_sets case, take #3
sata_nv: kill not-working hotplug code
sata_nv: kill struct nv_host_desc and nv_host
sata_nv: simplify constants
sata_nv: better irq handlers
sata_nv: convert to new EH
sata_nv: add hotplug support
sata_via: convert to new EH, take #3
libata: convert several bmdma-style controllers to new EH, take #3
ahci: disable NCQ support on vt8251
libata: implement per-dev EH action mask eh_info->dev_action[]
libata: move ata_eh_clear_action() upward
libata: implement and use ata_deh_dev_action()
libata: clear EH action on device detach
libata: move ata_do_simple_cmd() below ata_exec_internal()
libata: update ata_do_simple_cmd()
libata: make two functions global
libata: implement ata_port_max_devices()
libata: cosmetic updates
sata_sil: disable hotplug interrupts on two ATI IXPs
libata: add ap->pflags and move core dynamic flags to it
libata: fix ehc->i.action setting in ata_eh_autopsy()
libata: replace ap_lock w/ ap->lock in ata_scsi_error()
libata: implement ATA_EHI_RESUME_LINK
libata: clean up debounce parameters and improve parameter selection
libata: implement ATA_EHI_NO_AUTOPSY and QUIET
libata: separate out __ata_ehi_hotplugged()
libata: implement PM EH actions
libata: reimplement per-dev PM
libata: reimplement controller-wide PM
sata_sil: separate out sil_init_controller()
sata_sil: add suspend/sleep support
sata_sil24: separate out sil24_init_controller()
sata_sil24: add suspend/sleep support

Thago Galesi:

Remove unnecessary kmalloc/kfree calls in mtdchar

Theodore Ts'o:

kbuild: add option for stripping modules while installing them
ext2: clean up dead code from mount code
ext3: fix memory leak when the journal file is corrupted
ext3: remove inconsistent space before exclamation point in mount code