詳解ファイルシステム

FrontPage > kernel > 2.6.25-rc1 > 2.6.25-rc1_shortlog28

WANG Cong (10):

[S390] Remove TOPDIR from Makefile
CRIS: Remove 'TOPDIR' from Makefiles
INFINIBAND: Remove 'TOPDIR' from Makefiles
FRV: Drop 'TOPDIR' from Makefiles
FS: Remove dead code
[XFRM] xfrm_policy_destroy: Rename and relative fixes.
git-x86: unbreak UML
uml: code tidying under arch/um/os-Linux
uml: const and other tidying
uml: remove TOPDIR

Wade Farnsworth (2):

[POWERPC] 86xx: Add localbus and flash nodes to mpc8641_hpcn.dts
[POWERPC] 86xx: MPC8641 HPCN - call of_platform_bus_probe()

Wang Chen (5):

[IPV4]: Add raw drops counter.
[IPV6]: Add raw6 drops counter.
[UDP]: Defer InDataGrams increment until recvmsg() does checksum
[UDP]: Clean up for IS_UDPLITE macro
[UDP]: Counter increment should be in USER mode for recvmsg

Wei Yongjun (4):

[SCTP]: Fix miss of report unrecognized HMAC Algorithm parameter
[SCTP]: Fix kernel panic while received AUTH chunk while enabled auth
[SCTP]: Fix kernel panic while received AUTH chunk with BAD shared key identifier
[SCTP]: Fix kernel panic while received ASCONF chunk with bad serial number

Wendy Cheng (2):

[GFS2] Handle multiple glock demote requests
[GFS2] Remove lock methods for lock_nolock protocol

Will Newton (1):

8250.c: support specifying DW APB UARTs in device platform_data

Willy Tarreau (2):

x86: GEODE add the "mfgptfix" boot time option to fix MFGPT timers
x86: GEODE fix MFGPT input clock value

Wim Van Sebroeck (2):

[WATCHDOG] misc_register patch
SMBIOS/DMI: add type 41 = Onboard Devices Extended Information

Wolke Liu (1):

[ALSA] HDA-Intel - Add support for RV6xx HDMI audio

Xiantao Zhang (1):

[IA64] ia64_set_psr should use srlz.i

YOSHIFUJI Hideaki (21):

[IPV6] ADDRCONF: Rename ipv6_saddr_label() to ipv6_addr_label().
[IPV6] ADDRCONF: Allow address selection policy with ifindex.
[IPV6] ADDRCONF: Support RFC3484 configurable address selection policy table.
[NET]: Remove unused "mibalign" argument for snmp_mib_init().
[BRIDGE]: Use cpu_to_be16() where appropriate.
[DECNET]: Use htons() where appropriate.
[IEEE80211]: Use htons() where appropriate.
[IPVS]: Use htons() where appropriate.
[IRDA]: Use htons() where appropriate.
[MAC80211]: Use htons() where appropriate.
[RXRPC]: Use cpu_to_be32() where appropriate.
[SUNRPC]: Use htonl() where appropriate.
[TCP]: Convert several length variable to unsigned.
[IPV4] UDP,UDPLITE: Sparse: {__udp4_lib,udp,udplite}_err() are of void.
[IPV6] UDP,UDPLITE: Sparse: {__udp6_lib,udp,udplite}_err() are of void.
[IPV6] UDPLITE: Sparse: Declare non-static symbols in header.
[IPV6] ADDRLABEL: Sparse: Make several functions static.
[IPV6]: Sparse: Declare non-static ipv6_{route,icmp,frag}_sysctl_init() in header.
[IPV6] ADDRCONF: Sparse: Make inet6_dump_addr() code paths more straight-forward.
[IPV6] NDISC: Sparse: Use different variable name for local use.
[IPV6] ADDRLABEL: Fix double free on label deletion.

Yan Zheng (1):

A potential bug in inotify_user.c

Yasunori Goto (1):

Document lowmem_reserve_ratio

Yi Li (3):

[Blackfin] arch: fix bug - make memcpy return the dest addr.
[Blackfin] arch: fix bug kernel boot message: memory information is not reasonable
[Blackfin] arch: add "memmap=nn[KMG]@ss[KMG]" and "memmap=nn[KMG]$ss[KMG]" options to blackfin, based on arch/i386/kernel/e820.c

Yi Yang (3):

ACPI: /proc/acpi/alarm parsing: handle large numbers properly
cpufreq: fix obvious condition statement error
Add new string functions strict_strto* and convert kernel params to use them

Yinghai Lu (31):

x86: clear IO_APIC before enabing apic error vector.
x86: store core id bits in cpuinfo_x8
x86: use core id bits for apicid_to_node initialization
x86: set cpu_index to nr_cpus instead of 0
x86: do not set boot cpu in cpu_online_map at x86_64_start_kernel()
x86: not clear empty_zero_page again
x86: cleanup setup_node_zones called by paging_init()
x86: disable the GART early, 64-bit
x86: only call early_init_amd one time
x86: msr for AMD Fam 10h mmio
x86: checking aperture report for node instead
x86: only support sparsemem
x86_32: trim memory by updating e820
x86: left over fix for leak of early_ioremp in dmi_scan
x86: remove duplicated line about
x86: should use array directly for early_ptr
x86: not set boot cpu in cpu_present_map again
x86: not set boot cpu in cpu_online_map in smp_prepare_boot_cpu()
x86: change aper valid checking sequence
x86: fix recursion in arch/x86/kernel/cpu/mcheck/mce_amd_64.c
x86: fix overlap between pagetable with bss section
x86: fix nodemap_size according to nodeid bits
x86_64: add debug name for early_res
x86_64: make bootmap_start page align v6
x86: fix comments in vmlinux_64.lds
x86: remove unneeded round_up
x86: print out node_data addr and bootmap_start addr
serial: keep the DTR setting for serial console.
x86: fix mttr trimming
[CPUFREQ] powernow-k8 print pstate instead of fid/did for family 10h
Convert loglevel-related kernel boot parameters to early_param

Yoichi Yuasa (7):

[MIPS] remove unused mips_machtype
[MIPS] clean up au1xxx_irqmap.c include files
[MIPS] time: remove unused mips_timer_state()
[MIPS] move vr41xx_calculate_clock_frequency() to plat_time_init()
[MIPS] remove unneeded button check for reset
[MIPS] add cpu_wait() to machine_halt()
[MIPS] move the eXcite local config to excitedirectory

Yoshihiro Shimoda (5):

sh: Add support for SH7721 CPU subtype.
sh: Add support for SH7763 CPU subtype.
sh: Add OHCI and UDC platform devices for SH7720.
USB: m66592-udc: Add support for SH7722 USBF
USB: add support for SuperH OHCI

Yousef Lamlum (1):

V4L/DVB (7065): Artec T14BR patches

Yuichi Nakamura (1):

sh: syscall audit support.

Zhang Le (1):

Chinese: add translation of Codingstyle

Zhang Rui (18):

ACPI: add control method tracing support
ACPI: disable stray GPE, prevent ACPI interrupt storm
export thermal notification to userspace when nocrt is set
ACPI: ACPI Exception (): AE_NOT_FOUND, Processor Device is not present
the generic thermal sysfs driver
ACPI: register ACPI thermal zone as generic thermal zone devices
ACPI: ACPI thermal zone handle notification correctly
ACPI: register ACPI Fan as generic thermal cooling device
ACPI: register ACPI Processor as generic thermal cooling device
ACPI: register ACPI Video LCD as generic thermal cooling device
ACPI: attach thermal zone info
ACPI: CELSIUS_TO_KELVIN fixup
ACPI: thermal fixup
ACPI: video: create "brightness_switch_enabled" modparam
ACPI: video: delete unused display switch on hotkey event code
ACPI: create notifier chain to get hotkey events to graphics driver
ACPI: video: call ACPI notifier chain for ACPI video notifications
proc: detect duplicate names on registration

Zhang Wei (1):

[POWERPC] Add docs for Freescale DMA & DMA channel device tree nodes

Zhang Xiantao (41):

KVM: Portability: Split kvm_vcpu into arch dependent and independent parts (part 1)
KVM: Portability: Move some includes to x86.c
KVM: Portability: Move kvm_x86_ops to x86.c
KVM: Portability: Add vcpu and hardware management arch hooks
KVM: Portability: Combine kvm_init and kvm_init_x86
KVM: Portability: Move x86 specific code from kvm_init() to kvm_arch()
KVM: Portability: move KVM_CHECK_EXTENSION
KVM: Portability: Make kvm_vcpu_ioctl_translate arch dependent
KVM: Remove __init attributes for kvm_init_debug and kvm_init_msr_list
KVM: Portability: Add two hooks to handle kvm_create and destroy vm
KVM: Portability: Move kvm_vcpu_ioctl_get_dirty_log to arch-specific file
KVM: Portability: MMU initialization and teardown split
KVM: Portability: Move some macro definitions from kvm.h to x86.h
KVM: Portability: Move struct kvm_x86_ops definition to x86.h
KVM: Portability: Move vcpu regs enumeration definition to x86.h
KVM: Move some static inline functions out from kvm.h into x86.h
KVM: Portability: Move some function declarations to x86.h
KVM: Recalculate mmu pages needed for every memory region change
KVM: Portability: Split kvm_set_memory_region() to have an arch callout
KVM: Portability: Move unalias_gfn to arch dependent file
KVM: Portability: Move KVM_INTERRUPT vcpu ioctl to x86.c
KVM: Correct kvm_init() error paths not freeing bad_pge.
KVM: Replace kvm_lapic with kvm_vcpu in ioapic/lapic interface
KVM: Replace dest_Lowest_Prio and dest_Fixed with self-defined macros
KVM: Extend ioapic code to support iosapic
KVM: Portability: Move kvm{pic,ioapic} accesors to x86 specific code
KVM: Portability: Introduce kvm_vcpu_arch
KVM: Portability: Split mmu-related static inline functions to mmu.h
KVM: Portability: Move kvm_vcpu definition back to kvm.h
KVM: Portability: Expand the KVM_VCPU_COMM in kvm_vcpu structure.
KVM: Portability: Move kvm_vcpu_stat to x86.h
KVM: Portability: Move memslot aliases to new struct kvm_arch
KVM: Portability: Move mmu-related fields to kvm_arch
KVM: Portability: move vpic and vioapic to kvm_arch
KVM: Portability: Move round_robin_prev_vcpu and tss_addr to kvm_arch
KVM: Portability: Move kvm_vm_stat to x86.h
KVM: Move irqchip declarations into new ioapic.h and lapic.h
KVM: Move ioapic code to common directory.
KVM: Move kvm_vcpu_kick() to x86.c
KVM: Expose ioapic to ia64 save/restore APIs
[IA64] Appoint kvm/ia64 Maintainers

Zhang, Xiantao (1):

[IA64] Export three symbols for module use

Zhao Yakui (6):

Revert "speedstep-lib.c: fix frequency multiplier for Pentium4 models 0&1"
ACPI: Set _PSD ACPI_PDC_SMP_T_SWCOORD
ACPI : Check parameter when calling acpi_processor_get/set_throttling
ACPI : Update T-state coordination after getting _TSD info
ACPI : Add T-state event notifier function
ACPI: Update the t-state for every affected cpu when t-state is changed

Zhenyu Wang (3):

intel-agp: add new chipset ID
[intel_agp] fix name for G35 chipset
i915: Add chipset id for Intel Integrated Graphics Device

Zhu Yi (14):

mac80211: hardware scan rework
iwlwifi: Update iwlwifi version stamp to 1.1.18
iwlwifi: Update iwlwifi version stamp to 1.1.19
iwlwifi: replace 0x8086 with PCI_VENDOR_ID_INTEL
remove unused iwl4965_init_hw_rates function
iwl4965: fix rxon flags set to wrong value for A mode in .erp_ie_changed
iwlwifi: update version number to 1.2.22
iwlwifi: cache mac80211 conf setting during a hardware scan
iwlwifi: proper monitor support
iwlwifi: skip mac80211 conf during a hardware scan and replay it afterwards
iwlwifi: fix typo in 'drivers/net/wireless/iwlwifi/Kconfig'
iwlwifi: delay firmware loading from pci_probe to network interface open
iwlwifi: fix problem when rf_killswitch change during suspend/resume
iwlwifi: Update iwlwifi version stamp to 1.2.23

Zoltan Devai (1):

V4L/DVB (7037): Fix build breakage of the bttv driver, when advanced debugging is not enabled

Zoltan Menyhart (1):

[IA64] Slim-down __clear_bit_unlock

Zoltan Sogor (2):

[CRYPTO] tcrypt: Add common compression tester function
[CRYPTO] lzo: Add LZO compression algorithm support

akpm@linux-foundation.org (7):

[libata] Prefer SCSI_SENSE_BUFFERSIZE to sizeof()
fix drivers/ata/sata_fsl.c double-decl
[UBI] drivers/mtd/ubi/cdev.c: unused var
[UBI] drivers/mtd/ubi/wl.c: fix uninitialized var warning
[UBI] drivers/mtd/ubi/scan.c: fix uninitialized var warning
[MTD] Fix maps/physmap.c compilation with CONFIG_PM
mount options: fix tmpfs

bjorn.helgaas@hp.com (3):

PCI: print quirk name in debug messages
PCI: use dev_printk in quirk messages
PCI: use dev_printk in x86 quirk messages

bo yang (6):

[SCSI] megaraid_sas: add hibernation support
[SCSI] megaraid_sas: check max_sgl reported by FW for setting max_sectors_per_req
[SCSI] megaraid_sas: use unsigned long for sense_buff ptr
[SCSI] megaraid_sas: call cmd completion from reset
[SCSI] megaraid_sas: support for poll_mode_io (reduced interrupt)
[SCSI] megaraid_sas: Update version and changelog

clameter@sgi.com (1):

x86: clean up stack allocation and free

devzero@web.de (2):

x86 setup: early cmdline parser handle boolean options
x86 setup: be more verbose when probing EDD

dominik (1):

V4L/DVB (6589): Gigabyte u7000 usb dvb-t support

eric miao (32):

[ARM] pxa: define SSP platform devices for pxa2xx/pxa3xx
[ARM] pxa: add ssp devices and clk support for pxa25x/pxa27x/pxa3xx
[ARM] pxa: define "struct ssp_device" and add ssp_request()/ssp_free()
[ARM] pxa: move SSP register definitions from pxa-regs.h to regs-ssp.h
[ARM] pxa: use __raw_writel()/__raw_readl() for ssp_xxxx()
[ARM] pxa: make pxa2xx_spi driver use ssp_request()/ssp_free()
[ARM] pxa: create arch/arm/mach-pxa/device.c for all on-chip devices
[ARM] pxa: ensure SSP TX FIFO is empty instead of not full for pxa3xx
[ARM] pxa: add clk of CKEN_USBHOST for pxa3xx
[ARM] pxa: make OHCI register definitions available to both pxa27x and pxa3xx
[ARM] USB: update pxa27x ohci driver to use clk support
[ARM] USB: update to allow pxa27x ohci driver to support pxa3xx
[ARM] pxa: move pxa27x_device_ohci out of pxa27x.c for use with pxa3xx
[ARM] pxa: clean up pxa{27x,25x}_init_pm() to empty if CONFIG_PM not defined
[ARM] pxa: introduce a new file mfp-pxa3xx.h for common pin configurations
[ARM] pxa: remove un-used pxa3xx_mfp_set_xxx() functions
[ARM] pxa: make MFP configuration processor independent
[ARM] pxa: skip registers saving/restoring if entering standby mode
i2c-pxa: Remove hardcoded #ifdef and use cpu_is_pxa27x
[ARM] 4763/1: pxa: fix pxa3xx_get_clk_frequency_khz() to return KHz
[ARM] pxa: add basic support for Littleton (PXA3xx Form Factor Platform)
[ARM] pxa: add default config for littleton
[ARM] pxa: change set_kset_name() to direct name assignment for MFP sysclass
[ARM] pxa: fix the warning of undeclared "struct pxaohci_platform_data"
[ARM] pxa: introduce sysdev for IRQ register saving/restoring
[ARM] pxa: introduce sysdev for GPIO register saving/restoring
[ARM] pxa: add preliminary suspend/resume code for pxa3xx
[ARM] pxa: introduce sysdev for pxa3xx static memory controller
[ARM] 4801/1: pxa: fix building issues of missing pxa2xx-regs.h
[ARM] 4803/1: pxa: fix building issue of poodle.c caused by patch 4737/1
gpiolib: pca9539 i2c gpio expander support
deprecate obsolete pca9539 driver

frederic Rodo (1):

rtc ds1307: ds_1340 change init

hermann pitton (1):

V4L/DVB (6992): saa7134: remove Beholder devices without eeprom from auto detection

joe@perches.com (6):

[POWERPC] Add missing spaces in printk formats
[POWERPC] Add missing spaces in printk formats in arch/ppc
[POWERPC] arch/powerpc/: Spelling fixes
[POWERPC] include/asm-powerpc/: Spelling fixes
[POWERPC] arch/ppc/: Spelling fixes
[POWERPC] include/asm-ppc/: Spelling fixes

len.brown@intel.com (1):

ACPI: CONFIG_CPU_IDLE=ACPI by default

mabbas (2):

iwlwifi: accept up to 4K frame size on Rx side to fit A-MSDU frame
iwl4965: exclude 60M rate from probe request

mark gross (2):

intel-iommu: PMEN support
intel-iommu: fault_reason index cleanup

maximilian attems (3):

[AX25]: Beautify x25_init() version printk.
[AX25]: Kill ax25_bind() user triggable printk.
ACPI: battery: add sysfs serial number

mboton@gmail.com (1):

x86: ioport_{32|64}.c unification

npiggin@suse.de (1):

KVM: Convert KVM from ->nopage() to ->fault()

root (1):

SLUB: Do not upset lockdep

sergeh@us.ibm.com (1):

security: compile capabilities by default

serue@us.ibm.com (1):

agp: remove uid comparison as security check

travis@sgi.com (27):

percpu: use a kconfig variable to signal arch specific percpu setup
percpu: move arch XX_PER_CPU_XX definitions into linux/percpu.h
percpu: make the asm-generic/percpu.h more "generic"
x86_32: use generic percpu.h
x86: use generic percpu on 64-bit
x86: unify percpu.h
x86: change size of APICIDs from u8 to u16
x86: change size of node ids from u8 to u16
x86: change NR_CPUS arrays in powernow-k8
x86: change NR_CPUS arrays in smpboot_64
x86: change NR_CPUS arrays in topology
x86: cleanup x86_cpu_to_apicid references
x86: change NR_CPUS arrays in numa_64
x86: change NR_CPUS arrays in acpi-cpufreq
x86: change bios_cpu_apicid to percpu data variable
x86: fixup NR-CPUS patch for numa
x86: change NR_CPUS arrays in numa_64 fixup
x86: change bios_cpu_apicid to percpu data variable fixup
x86: add debug of invalid per_cpu map accesses
x86: change size of node ids from u8 to s16
x86: early cpu_to_node fix in numa_64.c
modules: fold percpu_modcopy into module.c
percpu: change Kconfig to HAVE_SETUP_PER_CPU_AREA
SPARC64: use generic percpu
ia64: use generic percpu
POWERPC: use generic per cpu
s390: use generic percpu linux-2.6.git

venkatesh.pallipadi@intel.com (4):

ACPI: idle: Fix acpi_safe_halt usages and interrupt enabling/disabling
ACPI: enable MWAIT for C1 idle
ACPI: cpuidle: Support C1 idle time accounting
cpuidle: Add a poll_idle method

vignesh babu (1):

[SCSI] libiscsi: use is_power_of_2

will schmidt (1):

[POWERPC] Update xmon slb code

Éric Piel (2):

ACPI: Taint kernel on ACPI table override (format corrected)
ACPI: Add "acpi_no_initrd_override" kernel parameter