詳解ファイルシステム

FrontPage > kernel > 2.6.24-rc1 > 2.6.24-rc1_shortlog13

Mariusz Kozlowski:

[MTD] remove redundant/dead code from physmap_of.c
[MTD] drivers/mtd/inftlmount.c: kmalloc + memset conversion to kcalloc
Documentation/DocBook/mtdnand.tmpl: kmalloc + memset conversion to kzalloc
[MTD] pmcmsp-flash.c: kmalloc + memset conversion to k[cz]alloc
[UBI] drivers/mtd/ubi/scan.c: kmalloc + memset conversion to kzalloc
[POWERPC] drivers/macintosh/therm_adt746x.c: kmalloc + memset conversion to kzalloc
sdio: kmalloc + memset conversion to kzalloc
[CIFS] remove some redundant argument checks
V4L/DVB (5953): msp3400-driver.c: kmalloc + memset conversion to kzalloc
V4L/DVB (5981): Zoran_driver.c: fix memset in ioctl
V4L/DVB (5982): Dev.c: memset fix
V4L/DVB (5983): Arv.c: fix memset in ioctl
drivers/net/wireless/prism54/oid_mgt.c: kmalloc + memset conversion to kzalloc
drivers/net/sb1250-mac.c: kmalloc + memset conversion to kcalloc
drivers/net/via-velocity.c: mostly kmalloc + memset conversion to kcalloc
net/tulip/xircom_cb.c: remove superfulous priv assignment
drivers/net: remove superfluous memset
drivers/net/wireless/wl3501_cs.c: remove redundant memset
skge: remove broken and unused PHY_M_PC_MDI_XMODE macro
[SCSI] kmalloc + memset conversion to kzalloc
[SCSI] mpt fusion: mostly kmalloc + memset conversion to kzalloc
[SCSI] mpt fusion: remove redundant memset
USB: ftdi-elan.c: kmalloc + memset conversion to kzalloc
usb: remove redundant memset from amd5536udc
PCI Hotplug: cpqphp_ctrl.c: kmalloc + memset conversion to kzalloc
[ARM] unbalanced parenthesis fix
HID: hidraw_connect() memleak fix
[ALSA] This patch removes memset() from snd_emu10k1_fx8010_info() which apparently
[ALSA] sound: snd_register_device_for_dev fix
include/asm-frv/thread_info.h: kmalloc + memset conversion to kzalloc
include/asm-m32r/thread_info.h: kmalloc + memset conversion to kzalloc
drivers/char/consolemap.c: kmalloc + memset conversion to kzalloc
doc firmware_sample_firmware_class.c: kmalloc + memset conversion to kzalloc
fs/autofs4/inode.c: kmalloc + memset conversion to kzalloc
drivers/char/ip2/ip2main.c: kmalloc + memset conversion to kzalloc
x86: kmalloc + memset conversion to kzalloc
kernel/fork.c: remove unneeded variable initialization in copy_process()

Mark A. Greer:

[POWERPC] MAINTAINERS shouldn't reference linuxppc-embedded

Mark Brown:

natsemi: Use NATSEMI_TIMER_FREQ consistently
natsemi: Use round_jiffies() for slow timers
natsemi: Check return value for pci_enable_device()

Mark Fasheh:

ocfs2: Remove unused structure field
ocfs2: Clear slot map when umounting a local volume
ocfs2: Sync ocfs2_fs.h with ocfs2-tools
ocfs2: move nonsparse hole-filling into ocfs2_write_begin()
ocfs2: Small refactor of truncate zeroing code
ocfs2: Move directory manipulation code into dir.c
ocfs2: Abstract out core dir listing functionality
ocfs2: Pass raw u64 to filldir
ocfs2: Remove open coded readdir()
ocfs2: Implement ocfs2_empty_dir() as a caller of ocfs2_dir_foreach()
ocfs2: Provide convenience function for ino lookup
ocfs2: Rename cleanups
ocfs2: Cleanup dirent size check
ocfs2: Structure updates for inline data
ocfs2: Read support for inline data
ocfs2: Write support for inline data
ocfs2: Read support for directories with inline data
ocfs2: Write support for directories with inline data
ocfs2: Optionally return filldir errors

Mark Fortescue:

Add in SunOS 4.1.x compatible mode for UFS

Mark Gross:

USB: usb-skeleton leaking locks on open

Mark Hills:

[ALSA] This patch is a USB quirk to ensure the Stanton Scratchamp v1 is detected
[ALSA] usb-audio: update quirk for Rane SL 1 (aka. Serato Scratch Live)

Mark Hindley:

3c59x: check return of pci_enable_device()

Mark Langsdorf:

[CPUFREQ] Support different families in fid/did to frequency conversion

Mark Lord:

libata: add support for ATA_16 on ATAPI
rtc: fix readback from /sys/class/rtc/rtc?/wakealarm

Mark M. Hoffman:

hwmon: (f71882fg) trivial whitespace cleanup
MAINTAINERS: update hwmon subsystem git trees
hwmon: (dme1737) Fix some merge conflicts
hwmon: (sis5595) fix sparse warning
hwmon: (vt8231) fix sparse warning

Mark Nelson:

x86: replace NT_PRXFPREG with ELF_CORE_XFPREG_TYPE #define
powerpc: add Altivec/VMX state to coredumps

Mark Zhan:

rtc-dev: no need to convert file->private_data to rtc device

Markus Armbruster:

Input: i8042 - restore control register when enabling port fails

Markus Brunner:

sh: Add gpio.h stubs for PFC definitions.
sh: Add SH7720 CPU support.
sh: Magic Panel R2 board support.
sh: Magic Panel MTD mapping update.
smc911x irq sense request and MPR2 board support

Markus Rechberger:

Fix Firmware class name collision

Martin Bachem:

hisax: hfc_usb: update to current CVS version

Martin J. Bligh:

ext2 reservations

Martin K. Petersen:

pata_cs5536: ATA driver for Geode companion chip

Martin Schwidefsky:

[S390] disassembler: fix output for insns with 6 operands.
[S390] xpram: fix bio_end{_,}io typo
move mm_struct and vm_area_struct
[S390] Update default configuration.
[S390] tlb flush fix.
[S390] Remove unused user_seg from thread structure.
[S390] Introduce follow_table in uaccess_pt.c
[S390] Cleanup page table definitions.
[S390] 4level-fixup cleanup

Martti Huttunen:

p54usb: Add device ID for Linksys WUSB54AG

Masahide NAKAMURA:

[IPV6] IPSEC: Omit redirect for tunnelled packet.
[IPV4] IPSEC: Omit redirect for tunnelled packet.
[IPSEC] IPV6: Fix to add tunnel mode SA correctly.

Masakazu Mokuno:

PS3: changed the way to handle tx skbs
PS3: Remove the workaround no longer needed

Masami Hiramatsu:

kprobes: support kretprobe blacklist

Masashi Kimoto:

ps3: Fix black and white stripes

Masatake YAMATO:

[SCSI] Fix signness of parameters in scsi module
fix typo about TBI in e1000 comment

Matej Laitl:

kconfig/menuconfig: distinguish between selected-by-another options and comments

Mathieu Desnoyers:

[POWERPC] Include pagemap.h in asm/powerpc/tlb.h
Fix f_version type: should be u64 instead of unsigned long
local_t Documentation update 2
local_t: update documentation
Change struct marker users
Combine instrumentation menus in kernel/Kconfig.instrumentation
Linux Kernel Markers
markers: Add samples subdir
Linux Kernel Markers - Samples
Linux Kernel Markers - Documentation

Matias Zabaljauregui:

Pagetables to use normal kernel types

Matt Carlson:

[TG3]: Walk PCI capability lists.
[TG3]: ASIC decoding and basic CPMU support.
[TG3]: Add 5784 and 5764 support.
[TG3]: Add new 5761 NVRAM decode routines
[TG3]: Add 5761 APE support
[TG3]: Add 5761 support
[TG3]: WOL defaults
[TG3]: Update version to 3.83
[TG3]: Fix APE induced regression
[TG3]: Add 5723 support
[TG3]: Add management FW version to ethtool report
[TG3]: PCI command adjustment
[TG3]: Update version to 3.85

Matt Doran:

V4L/DVB (5960): Add module parameter to enable SFN workaround

Matt LaPlante:

typo fixes

Matt Reimer:

[MTD] [NAND] add s3c2440-specific read_buf/write_buf
[MTD] [NAND] treat any negative return value from correct() as an error

Matt Waddel:

m68knommu: fix syscall tracing
m68knommu: define __clear_user macro

Matteo Croce:

AR7 ethernet
[WATCHDOG] AR7: watchdog timer
AR7 ethernet: small post-merge cleanups and fixes

Matteo Vit:

[AVR32] add multidrive support for pio driver
[AVR32] fix command line parsing in early_parse_fbmem

Matthew Garrett:

libata: Integrate ACPI-based PATA/SATA hotplug - version 5

Matthew Ranostay:

[ALSA] hda: BIOS changing subsystem id
[ALSA] hda: More subsystem id BIOS changes

Matthew Wilcox:

[SCSI] Fix async scanning double-add problems
[SCSI] advansys: undate version, copyright, etc
[SCSI] advansys: Clean up proc_info implementation
[SCSI] advansys: Improve interrupt handler
[SCSI] advansys: Stop checking the scsi_cmnd belongs to our Scsi_Host
[SCSI] advansys: Make advansys_board_found a little more readable
[SCSI] advansys: Move to scsi hotplug initialisation model
[SCSI] advansys: Convert to PCI driver model
[SCSI] advansys: Convert to EISA driver model
[SCSI] advansys: Convert to ISA driver model
[SCSI] advansys: Update resource management
[SCSI] advansys: More PCI cleanups
[SCSI] advansys: remove AscCompareString()
[SCSI] Add QUANTUM XP34301 to the blacklist
[SCSI] advansys: remove INQUIRY sniffing
[SCSI] advansys: misc reformatting
[SCSI] advansys: delete AscGetChipBusType
[SCSI] advansys: ioremap no longer needs page-aligned addresses
[SCSI] advansys: Stop using n_io_port in Scsi_Host structure
[SCSI] advansys: Move struct device out of the cfg structures
[SCSI] advansys: Remove library-style callback routines
[SCSI] advansys: Remove pci_slot_info
[SCSI] advansys: use memcpy instead of open-coded loop
[SCSI] advansys: Move documentation to Documentation/scsi
[SCSI] advansys: Fix VLB driver name
[SCSI] advansys: Create AdvBuildCarrierFreelist
[SCSI] advansys: Create AdvLoadMicrocode
[SCSI] advansys: Reformat microcode
[SCSI] advansys: Shrink advansys_board_found a little more
[SCSI] advansys: Remove `waiting' queue
[SCSI] advansys: Remove a check for an impossible condition
[SCSI] advansys: Remove `done' queue
[SCSI] advansys: Remove `active' queue and all remaining internal queueing code
[SCSI] advansys: Enable interrupts earlier in queuecommand
[SCSI] advansys: Support 16-byte commands properly
[SCSI] advansys: Remove a check for an impossible condition
[SCSI] advansys: Remove some custom wrappers
[SCSI] advansys: Comment/indentation/macro cleanup
[SCSI] advansys: Use DRV_NAME
[SCSI] Improve error message when offlining a device
[SCSI] scsi_scan: Cope with kthread_run failing
[SCSI] ibmmca: Stop leaking scsi_hosts on exit
[SCSI] ide-scsi: Close narrow race in release
[SCSI] ncr53c8xx: Call scsi_host_put in release
[SCSI] aha152x: Close narrow race in release
[SCSI] qlogicfas: Close narrow race in release
[SCSI] simscsi: Free scsi host on error
[SCSI] aic94xx: Free scsi host on error
[SCSI] ips: Close narrow race in release
[SCSI] Remove ->pid field from scsi_cmnd
[SCSI] pluto: Don't abuse ->done for internal commands
[SCSI] Fix mistaken uses of ->done
[SCSI] qlogicpti: Add a slave_configure method
[SCSI] gdth: Stop abusing ->done for internal commands
[SCSI] Get rid of scsi_cmnd->done
[SCSI] advansys: Eliminate prototypes
[SCSI] advansys: Remove array of scsi targets
[SCSI] advansys: Restructure asc_execute_scsi_cmnd()
[SCSI] advansys: Fix simultaneous calls to ->queuecommand
[SCSI] advansys: Improve reset handler
[SCSI] advansys: Remove ASC_SELECT_QUEUE_DEPTHS
[SCSI] advansys: Remove ASC_WIDE_BOARD predicate
[SCSI] advansys: Sort out irq number mess
[SCSI] advansys: Merge ASC_IERR definitions
[SCSI] advansys: Remove asc_board_t typedef and ASC_BOARDP macro
[SCSI] advansys: Remove library version & serial numbers
[SCSI] advansys: Sort out debug macros
[SCSI] advansys: Remove private lock
[SCSI] advansys: Get rid of board index number
[SCSI] advansys: Make sdtr_period_tbl a pointer
[SCSI] advansys: Move a couple of fields from struct board to struct adv_dvc
[SCSI] advansys: Remove DvcGetPhyAddr
[SCSI] advansys: convert to use the data buffer accessors
[SCSI] advansys: Remove a couple of uses of bus_to_virt
[SCSI] advansys: Use dma mapping for overrun buffer
[SCSI] advansys: Changes to work on parisc
gdth: Make one abuse of scsi_cmnd less obvious
m68k: Export cachectl.h
Update DMA-mapping documentation
[SCSI] fc4: remove this and all associated drivers
[PARISC] Fix infinite loop in /proc/iomem
[SCSI] sym53c8xx: Use pci_dev irq number
[SCSI] sym53c8xx: Remove data_mapping and data_mapped
[SCSI] sym53c8xx: Remove unnecessary check in queuecommand
[SCSI] sym53c8xx: Don't disable interrupts in the interrupt handler
[SCSI] sym53c8xx: Stop overriding scsi_done
[SCSI] sym53c8xx: Use pdev->revision
[SCSI] sym53c8xx: Remove ->device_id
[SCSI] sym53c8xx: Remove io_ws, mmio_ws and ram_ws elements
[SCSI] sym53c8xx: Remove tag_ctrl module parameter
[SCSI] sym53c8xx: Simplify DAC DMA handling
[SCSI] sym53c8xx: Use scmd_printk where appropriate
[SCSI] sym53c8xx: Get rid of IRQ_FMT and IRQ_PRM
[SCSI] sym53c8xx: Make interrupt handler capable of returning IRQ_NONE
[SCSI] sym53c8xx: Remove pci_dev pointer from sym_shcb
[SCSI] sym53c8xx: Remove sym_xpt_async_sent_bdr

Matthias Kaehlcke:

[MTD] Use mutex instead of semaphore in dataflash driver
fs/locks.c: use list_for_each_entry() instead of list_for_each()
V4L/DVB (5946): Use mutex instead of semaphore in the DVB frontend tuning interface
Use mutex instead of semaphore in the Host AP driver
[SCSI] osst: Use mutex instead of semaphore
USB: ELAN U132 Host Controller Driver: convert sw_lock to mutex
sched: use list_for_each_entry_safe() in __wake_up_common()
[ALSA] ESS Maestro 1/2/2E Sound Card: Use list_for_each_entry
[ALSA] Intel HD Audio: Use list_for_each_entry(_safe)
[ALSA] Routines for effect processor FX8010: Use list_for_each_entry
use mutex instead of semaphore in isdn subsystem common functions
ieee1394: ieee1394_core.c: use DEFINE_SPINLOCK for spinlock definition
[SPARC] Videopix Frame Grabber: Convert device_lock_sem to mutex
fs/file_table.c: use list_for_each_entry() instead of list_for_each()
fs/eventpoll.c: use list_for_each_entry() instead of list_for_each()
fs/super.c: use list_for_each_entry() instead of list_for_each()
kernel/exit.c: Use list_for_each_entry(_safe) instead of list_for_each(_safe)
kernel/time/clocksource.c: Use list_for_each_entry instead of list_for_each
mm/oom_kill.c: Use list_for_each_entry instead of list_for_each
kcopyd use mutex instead of semaphore

Matthias Schwarzott:

V4L/DVB (6382): saa7134: fix NULL dereference at suspend time for cards without IR receiver

Matti Linnanvuori:

Mutex documentation is unclear about software interrupts, tasklets and timers
atomic_ops.txt has incorrect, misleading and insufficient information [Bug 9020]

Mattia Dongili:

sony-laptop: old Vaio models contain 2 IO port entries

Mattias Nissler:

mac80211: Defer setting of RX_FLAG_DECRYPTED.
rt2x00: Fix residual check in PLCP calculations.

Mauro Carvalho Chehab:

V4L/DVB (6014): vivi: use videobuf_read_stream()
V4L/DVB (6079): Cleanup: remove linux/moduleparam.h from drivers/media files
V4L/DVB (6111): Fix a warning when compiling on x86_64
V4L/DVB (6247): Fix bug #8689: Fixes IR stop/start during suspend/resume
V4L/DVB (6251): Replace video-buf to a more generic approach
V4L/DVB (6252): Adapt drivers to use the newer videobuf modules
V4L/DVB (6253): Convert vivi to use the newer videobuf-dma-sg module
V4L/DVB (6254): Add videobuf-vmalloc
V4L/DVB (6255): Convert vivi to use videobuf-vmalloc
V4L/DVB (6256): Remove the obsolete video-buf module
V4L/DVB (6257): Rename video-buf-dvb to videobuf-dvb to be consistent with the other patches
V4L/DVB (6259): Fix vivi poll() method
V4L/DVB (6260): Fix Kconfig dependency
V4L/DVB (6261): Cleans mem->vmalloc after vfree
V4L/DVB (6262): An allocation error message were being printed as a debug msg
V4L/DVB (6263): Fix buffer release code
V4L/DVB (6264): Make the vertical lines to move
V4L/DVB (6265): Prevent for calling mmap_free without an allocated buffer
V4L/DVB (6266): videobuf cleanup: mmap check is common to all videobuf. Make it at core
V4L/DVB (6277): vivi cleanup: remove the unused vars
V4L/DVB (6286): Add support for MSI TV @nywhere A/D NB
V4L/DVB (6287): Fix DMA Scatter/Gather constructor
V4L/DVB (6290): remove videobuf_set_pci_ops
V4L/DVB (6291): Fix: avoid oops on some SMP machines
V4L/DVB (6292): videobuf_core init always require callback implementation
V4L/DVB (6320): v4l core: remove the unused .hardware V4L1 field
V4L/DVB (6378a): Removal of VIDIOC_[G|S]_MPEGCOMP from feature-removal-schedule.txt
V4L/DVB (6378b): Updates info about the removal of V4L1 at feature-removal-schedule.txt