| date | link |
|---|
| 2009/10/ 2 07:52:20 | sh: mach-ecovec24: Document DS2 switch settings. |
| 2009/ 9/30 00:50:30 | sh: mach-ecovec24: modify 1st MTD area to read only |
| 2009/ 9/28 08:21:41 | sh: mach-ecovec24: Add TouchScreen support |
| 2009/ 8/21 01:24:54 | sh: add FSI driver support for ms7724se |
| 2009/ 9/24 06:28:27 | sh: mach-ecovec24: Add active low setting for sh_eth |
| 2009/ 9/16 11:34:34 | sh: mach-ecovec24: Add user debug switch support |
| 2009/ 9/11 09:05:00 | sh: kfr2r09: document the PLL/FLL <-? |
| 2009/ 9/14 11:23:16 | sh: mach-ecovec24: need asm/clock.h. |
| 2009/ 9/14 11:22:31 | sh: mach-ecovec24: deassert usb irq on boot. |
| 2009/ 9/14 11:23:00 | sh: Add KEYSC support for EcoVec24 |
| 2009/ 9/15 00:21:34 | sh: add kycr2_delay for sh_keysc |
| 2009/ 9/10 01:40:05 | sh: Add EcoVec24 romImage defconfig |
| 2009/ 9/10 01:40:02 | sh: USB disable process is needed if romImage boot for EcoVec24 |
| 2009/ 9/10 01:40:00 | sh: EcoVec24: add HIZA setting for LED |
| 2009/ 9/10 01:39:58 | sh: EcoVec24: write MAC address in boot |
| 2009/ 9/10 01:39:55 | sh: Add romImage support for EcoVec24 |
| 2009/ 9/10 01:39:52 | sh: add romimage-macros.h |
| 2009/ 9/10 01:39:37 | sh: Add I2C device support for EcoVec24 |
| 2009/ 8/26 11:04:39 | sh: Add LCDC Panel support for EcoVec24 |
| 2009/ 8/26 11:04:36 | sh: Add CEU support for EcoVec24 |
| 2009/ 8/26 11:04:34 | sh: Add support LCDC for EcoVec24 |
| 2009/ 8/26 11:04:31 | sh: Add USB support for EcoVec24 |
| 2009/ 8/26 11:04:26 | sh: Add SH-ETH support for EcoVec24 |
| 2009/ 8/26 11:04:22 | sh: modify to enable boot for EcoVec24 |
| 2009/ 8/26 10:49:44 | sh: fix CPU_SH7723/7724 numbering bug |
| 2009/ 8/21 09:42:59 | ASoC: Add FSI-AK4642 sound support for SuperH |
| 2009/ 8/21 10:23:41 | ASoC: Add ak4642/ak4643 codec support |
| 2009/ 8/20 21:01:05 | ASoC: Add SuperH FSI driver support for ALSA |
| 2009/ 8/19 12:08:33 | sh: Add EcoVec (SH7724) board support |
| 2009/ 8/19 10:24:15 | sh: Add SH7724 support to NR_ONCHIP_DMA_CHANNELS |
| 2009/ 8/19 00:12:15 | sh: USB0 resource area fix for ms7724se |
| 2009/ 8/18 07:00:20 | sh: Prevent heartbeat from scribbling over non-LED bits. |
| 2009/ 8/18 06:51:47 | sh: clkfwk: Support additional IFC divisor on SH7724. |
| 2009/ 8/18 06:51:28 | sh: mach-kfr2409: add FLLFRQ value for PLL correction. |
| 2009/ 8/ 3 04:52:24 | sh: Add SH7724 DMAC support. |
| 2009/ 8/ 3 04:52:03 | sh: ms7724se: add 1280x720 lcdc output support |
| 2009/ 6/24 10:31:25 | V4L/DVB (12160): soc-camera: fix missing clean up on error path |
| 2009/ 6/29 07:40:00 | sh: ms7724se: Enable sh_eth in defconfig. |
| 2009/ 6/26 07:05:39 | sh: ms7724se: Add sh_eth support |
| 2009/ 6/10 05:04:32 | sh: sh7724: Add JPU support |
| 2009/ 6/ 8 10:05:12 | sh: sh7724: INTC setting update |
| 2009/ 6/ 2 02:49:28 | sh: sh7723: L2 cache initialization. |
| 2009/ 6/ 2 02:49:25 | sh: sh7724: L2 cache initialization. |
| 2009/ 6/ 2 02:49:20 | sh: add weak l2_cache_init function. |
| 2009/ 6/ 2 02:49:13 | sh: add RAMCR definition for sh4 |
| 2009/ 5/29 07:41:26 | sh: fix CONFIG_SH_PCLK_FREQ bug for sh7724 |
| 2009/ 5/29 07:41:23 | sh: SH7724 has an L2 cache. |
| 2009/ 5/26 07:04:52 | sh: Add ms7724se (SH7724) board support |
| 2009/ 5/24 23:54:30 | net: sh_eth: Add support SH7724 |
| 2009/ 4/15 11:43:07 | sh: sh7724: Add VEU support. |
| 2009/ 4/15 11:43:03 | sh: sh7724: Add VPU support. |
| 2009/ 4/16 13:16:07 | sh: sh7724: Add I2C support. |
| 2009/ 4/15 11:42:47 | serial: sh-sci: SH7724 support. |
| 2009/ 4/16 14:40:56 | sh: Add support for SH7724 (SH-Mobile R2R) CPU subtype. |
| 2009/ 4/10 00:54:07 | sh: sh7786: modify usb setup timeout judgment bug. |
| 2009/ 4/13 06:40:04 | sh: ap325: use edge control for ov772x camera |
| 2009/ 4/10 13:35:28 | sh: urquell: Fix up address mapping in board comments. |
| 2009/ 4/ 7 08:41:57 | sh: urquell: Add board comment |
| 2009/ 3/31 03:44:22 | V4L/DVB (11327): ov772x: add edge contrl support |
| 2009/ 3/31 03:44:22 | V4L/DVB (11324): ov772x: wrong pointer for soc_camera_link is modified |
| 2009/ 3/11 07:20:32 | sh: ap325 and Migo-R use new sh_mobile_ceu_info flags |
| 2009/ 1/22 00:38:31 | sh: ap325rxa: Add ov772x support, again. |
| 2009/ 3/26 00:39:49 | sh: Tidy up sh7786 pinmux table. |
| 2009/ 3/26 00:24:01 | sh: urquell: enable LAN device |
| 2009/ 3/25 08:54:23 | [[ sh: Remove buggy definition from SH7786 pinmux_data[]>http://git.kernel.org/?p=linux/kernel/git/torvalds...]] |
| 2009/ 3/13 06:08:20 | V4L/DVB (11029): video: use videobuf_waiton() in sh_mobile_ceu free_buffer() |
| 2009/ 3/13 06:08:20 | V4L/DVB (11028): ov772x: use soft sleep mode in stop_capture |
| 2009/ 2/23 12:12:58 | V4L/DVB (10672): sh_mobile_ceu_camera: include NV* formats into the format list only once. |
| 2009/ 2/23 12:12:58 | V4L/DVB (10671): sh_mobile_ceu: SOCAM flags are not platform dependent |
| 2009/ 2/23 12:12:58 | V4L/DVB (10670): tw9910: bit mask operation fix on tw9910_mask_set. |
| 2009/ 2/23 12:12:58 | V4L/DVB (10669): ov772x: Add image flip support |
| 2009/ 2/23 12:12:58 | V4L/DVB (10668): ov772x: bit mask operation fix on ov772x_mask_set. |
| 2009/ 2/23 12:12:58 | V4L/DVB (10667): ov772x: setting method to register is changed. |
| 2009/ 2/23 12:12:58 | V4L/DVB (10666): ov772x: move configuration from start_capture() to set_fmt() |
| 2009/ 1/27 03:02:41 | V4L/DVB (10616): tw9910: color format check is added on set_fmt |
| 2009/ 3/12 08:40:15 | sh: Add OHCI USB support for SH7786 |
| 2009/ 3/ 5 17:37:12 | sh: urquell: Add smc91x support and update defconfig accordingly. |
| 2009/ 3/ 3 16:22:00 | sh: Urquell board support. |
| 2009/ 3/ 3 15:40:25 | sh: Add support for SH7786 CPU subtype. |
| 2009/ 2/27 15:41:14 | sh: ap325rxa: Revert ov772x support. |
| 2009/ 2/10 09:04:00 | serial: sh-sci: fix overrun error handling for SH7785 SCIF. |
| 2009/ 1/28 09:29:13 | sh: Fix up T-bit error handling in SH-4A mutex fastpath. |
| 2009/ 1/27 02:46:12 | sh: ap325rxa: Enable ov772x in defconfig. |
| 2009/ 1/22 00:38:31 | sh: ap325rxa: Add ov772x support. |
| 2009/ 1/22 00:33:21 | sh: ap325rxa: control camera power toggling. |
| 2009/ 1/22 00:18:05 | sh: mach-migor: Enable ov772x and tw9910 in defconfig. |
| 2009/ 1/ 5 16:25:16 | sh: mach-migor: Add tw9910 support. |
| 2008/12/ 2 16:42:24 | sh: mach-migor: Delete soc_camera_platform setup. |
| 2008/12/ 2 16:38:34 | sh: mach-migor: Add ov772x support. |
| 2008/12/29 06:04:44 | V4L/DVB (10098): ov772x: fix try_fmt calculation method |
| 2008/12/29 06:04:37 | V4L/DVB (10097): ov772x: clear i2c client data on error and remove |
| 2008/12/29 06:04:22 | V4L/DVB (10096): ov772x: change dev_info to dev_dbg |
| 2008/12/29 06:04:16 | V4L/DVB (10095): The failure of set_fmt is solved in tw9910 |
| 2008/12/29 06:04:06 | V4L/DVB (10094): Add tw9910 driver |
| 2008/12/18 13:50:40 | V4L/DVB (10092): Change V4L2 field to ANY from NONE on sh_mobile_ceu_camera.c |
| 2008/12/18 12:51:21 | V4L/DVB (10089): Add interlace support to sh_mobile_ceu_camera.c |
| 2008/12/18 12:47:46 | V4L/DVB (10087): Add new enum_input function on soc_camera |
| 2008/12/18 12:46:45 | V4L/DVB (10086): Add new set_std function on soc_camera |
| 2008/12/18 11:07:11 | V4L/DVB (10069): Add ov7725 support to ov772x driver |
| 2008/12/18 11:05:49 | V4L/DVB (10068): Change device ID selection method on ov772x driver |
| 2008/12/17 14:05:45 | V4L/DVB (10067): Remove ov772x_default_regs from ov772x driver |
| 2008/12/ 1 09:44:51 | V4L/DVB (9784): Register name fix for ov772x driver |
| 2008/12/ 1 09:44:48 | V4L/DVB (9783): Change power on/off sequence on ov772x |
| 2008/10/24 15:43:07 | V4L/DVB (9488): Add ov772x driver |
| 2008/10/31 16:01:19 | sh: Enable NFS root in Migo-R defconfig. |
| 2008/10/30 14:49:03 | Add support usb setting on sh 7366 |
| 2008/10/28 15:33:48 | SH 7366 needs SCIF_ONLY |
| 2008/10/28 17:36:11 | sh: Provide a sample defconfig for the UL2 (SH7366) board. |
| 2008/10/16 19:51:20 | V4L/DVB (9244): video: improve sh_mobile_ceu buffer handling |
コメントをかく